Insulated Protective Cap

Detailed Description
15kV 200A Insulated Protective Cap is an accessory device designed to electrically insulate and mechanically seal load break bushing interfaces. When mated to a load break product and the drain wire is attached to ground, the Insulated Protective Cap provides a fully shielded, submersible insulating cover for energized bushings. The Insulated Protective Cap can be used for permanent or temporary installation on 200A bushings, junctions or insulated standoff bushing.

Technical Specifications

The Technical Specifications of this Insulated Protective Cap define its electrical insulation and mechanical sealing parameters for load break bushing interface protection. The rated voltage of 15kV and rated current of 200A establish the operating envelope for the EX-JYM-15kV 200A model, ensuring reliable insulation and sealing performance in medium-voltage distribution networks. This Insulated Protective Cap is an accessory device designed to electrically insulate and mechanically seal load break bushing interfaces. When mated to a load break product and the drain wire is attached to ground, this Insulated Protective Cap provides a fully shielded, submersible insulating cover for energized bushings. The EX-JYM-15kV 200A Insulated Protective Cap can be used for permanent or temporary installation on 200A bushings, junctions, or insulated standoff bushings. As a certified Switchgear Insulation Component, this Insulated Protective Cap ensures safe maintenance operations and protection against environmental contamination. Each Switchgear Insulation Component undergoes routine dielectric and sealing integrity testing to verify compliance. Proper installation of this Insulated Protective Cap as a Switchgear Insulation Component ensures long-term reliability in 15kV underground distribution systems.

Description	Reference                      No.	Rated voltage	Rated current
200A 15kV Insulated Protective Cap	EX-JYM-15/200	15kV	200A